Lawn Spreader Settings
You can use any lawn spreader to apply Westland Lawn Care Products. The table below indicates which setting to use to apply at the correct rate.
|Westland Lawn Feed, Weed Moss Killer||Aftercut||Westland Autumn Feed & Moss Killer||Westland Lawn Sand|
|Westland Lawn Spreader||4||4||4||3|
|Westland Premium Lawn Spreader||5||5||6||5|
|Scotts EasyGreen Rotary||26||26||27||30 x 2|
|JA Bowers Total Lawncare||3.25||3.25||3.25||3.25|
|JAB Lawn Tenda||3.75||3.75||3.75||2.75|
|JAB Lawn Spreader||3.25||3.25||3.25||3.0|
|Gardena 18″ Blue||3.5||4||3.5||3.5|
- All settings are for guidance only. Variations in product density and granule size can affect flow rate. Wear and tear can affect the performance of the individual spreader
- Avoid over-dosing at all times. It is recommended that a lower setting is first tried to avoid the risk of over-dosing. Estimate the flow rate by weighing the contents remaining after one pass over a measured area.
- Always complete a check calibration before first use and before use each season.
- Always ensure the spreader is cleaned thoroughly after use to avoid deterioration of the spreading mechanism.
USE PESTICIDES SAFELY: ALWAYS READ THE LABEL INSTRUCTIONS