westland garden health logo

Consumer helpline 01480 443789

10am-4pm, Mon-Fri

Flopro Multi Tap Connector
Rollover to zoom

This Flopro Indoor Multi Tap Connector fits a variety of indoor square, round and mixer taps. It is quick and easy to install. Includes 3 x sealing washers in a variety of sizes to ensure a leak-free connection to your tap.

Features

  • Made from premium grade plastic
  • Diameter: For taps up to 43mm high by 34mm wide
  • 100% compatible with all watering brands
  • View our complete Flopro range here

universal fitting icon snap fit icon anti leak icon

  • Caring for your tools
  • How to Use
  • Tips & Advice

How to maintain and care for your Garden Tools

 

It is very important to take proper care of your garden tool so that it continues to perform at its peak. Do not leave your tool outside, always store it away after use in a dry environment. Even in dry weather conditions your tools, if left outside, are exposed to moisture from wet grass and dew.

Cleaning and drying your garden tools will keep them in good working order. Always remove all of the soil from your digging tools after each use by washing the dirt off.

Never put your tools away wet. Allow them to dry completely before storing to prevent rusting and handle rot. For all wood handled tools apply a light coating of boiled linseed oil to help prevent the wood from drying out and cracking. If a wooden handle is very dirty, remove as much of the soil as possible with a stiff brush. If you need to use water, gently wet the handle with a damp cloth, making sure that you don’t soak the wood, as this may cause the grain to lift and the handle to swell.

Thoroughly clean any tools which have been used for chemical applications. Fertilisers and other chemicals will rapidly corrode any metal.

  • Select the appropriate size washer for the best fit to your indoor square tap, and place into the bottom of the connector
  • Unscrew the top of the connector so you can fit the connector over the spout of your tap, and push onto the tap
  • Once placed onto the tap, screw the top of the connector back to establish a secure connection
  • Attach a hose connector with hose to the outlet of the tap connector. Your tap connector is now ready to use

For any questions or advice, please contact our technical advice line on 01480 443789 (Mon-Fri 10am-4pm) or email customerservice@westlandhorticulture.com

Featured Products

Recently Viewed Products