Rollover to zoom
The Flopro Four Way Tap Connector, converts a single tap into four taps, each with its own flow control. Water flow is adjustable for each hose. The outer two male connectors can be removed to enable two timers. The connector securely attaches to the tap and like all Flopro watering products, will fit to all watering brands so will work with any watering you already have at home.
- Connect up to four hoses to one tap
- Individual flow adjustment
- Fits most taps with BSP thread
- Made from premium grade plastic
- UV resistant
- Diameter: 3/4″ 26.5mm BSP (G3/4)/ 1/2″ 21mm BSP (G1/2) inserts
Find out more about the Flopro watering range
- How to Use
- Tips & Advice
- Unscrew the clamping nut of the hose connector and thread onto the piece of hose you are going to use
- Then firmly push that end of hose into the hose fitting, as far as it will go, allowing the claws to clamp down onto the hose
- Hand tighten the clamping nut over the hose fitting
- To use push the hose connector onto the spray gun, nozzle or other accessory
For any questions or advice, please contact our technical advice line on: 01480 443789 (Mon – Fri 10am – 4pm) or email [email protected]
