westland garden health logo

Consumer helpline 01480 443789

10am-4pm, Mon-Fri

Flopro+ Hose Connector Starter Set
Rollover to zoom

Along with a hose, the Flopro Supergrip Hose Connector Starter Kit gives you a great start to watering and with a firmer grip. The connectors are 20% longer vs standard in market for a firmer grip on the hose without any leaks. Furthermore, the connectors contain a stainless steel spring for smoother and quicker connection to spray guns, sprinklers and taps. The Perfect Fit Outdoor Tap Connector is guaranteed to fit any outdoor tap in UK. The nozzle will give you ease of use and a perfect waterflow with 3 settings to start your watering job. Made of premium ABS plastic for impact absorption and durability.

This set includes

Features

  • Made from superior ABS plastics
  • UV resistant
  • Connectors and Nozzle 1/2″ (12.5mm). Tap Adapter: 1″ (25mm) with 3/4″ (19mm) & 1/2″ (12.5mm) inserts
  • 100% compatible with all watering brands

 

  • Caring for your tools
  • How to Use
  • Tips & Advice

How to maintain and care for your Garden Tools

 

It is very important to take proper care of your garden tool so that it continues to perform at its peak. Do not leave your tool outside, always store it away after use in a dry environment. Even in dry weather conditions your tools, if left outside, are exposed to moisture from wet grass and dew.

Cleaning and drying your garden tools will keep them in good working order. Always remove all of the soil from your digging tools after each use by washing the dirt off.

Never put your tools away wet. Allow them to dry completely before storing to prevent rusting and handle rot. For all wood handled tools apply a light coating of boiled linseed oil to help prevent the wood from drying out and cracking. If a wooden handle is very dirty, remove as much of the soil as possible with a stiff brush. If you need to use water, gently wet the handle with a damp cloth, making sure that you don’t soak the wood, as this may cause the grain to lift and the handle to swell.

Thoroughly clean any tools which have been used for chemical applications. Fertilisers and other chemicals will rapidly corrode any metal.

Perfect Fit Outdoor Tap Connector

Before you start make sure to remove any bib or spout on tap if present. Find the correct tap reducer size to fit to your tap. Screw on firmly to your outside tap. It is now ready to use with a hose connector.

Supergrip Spray Gun Connector – Water Stop

  • Unscrew the cap of the hose connector and thread onto the piece of hose you are going to use
  • Then firmly push connector hose fitting over the end of hose, as far as it will go, allowing the claws to clamp down onto the hose
  • Hand tighten the cap over the hose fitting
  • To use push the hose connector onto the spray gun, nozzle or other accessory

Supergrip Hose Tap Connector

  • Unscrew the cap of the hose connector and thread onto the piece of hose you are going to use
  • Then firmly push connector hose fitting over the end of hose, as far as it will go, allowing the claws to clamp down onto the hose
  • Hand tighten the cap over the hose fitting
  • To use push the hose connector onto the tap connector or accessory

Nozzle
Simply turn clockwise to start the flow of water and change to different spray patterns. Turn anti-clockwise to change back through spray patterns and close

For any questions or advice, please contact our technical advice line on 01480 443789 (Mon-Fri 10am-4pm) or email customerservice@westlandhorticulture.com

Featured Products

Recently Viewed Products