westland garden health logo

Consumer helpline 01480 443789

10am-4pm, Mon-Fri

Flopro+ Hose Repairer
Rollover to zoom

Use this Flopro Supergrip Hose Repairer for the permanent connection of two hoses. Whether you are repairing a broken hose or simply wish to join two together to create a longer hose, this ultra tough repairer will do the job. The extended clench mechanism ensures a permanent hose connection. The connector allows a snap fit to all watering brands.

Features

  • Made from superior ABS plastics
  • UV resistant
  • Diameter: 12.5mm / 1/2″
  • 100% compatible with all watering brands

Flopro+ Hose Repairer universal fitting icon Flopro+ Hose Repairer snap fit icon anti leak icon super grip icon

  • Caring for your tools
  • How to Use
  • Tips & Advice

How to maintain and care for your Garden Tools

 

It is very important to take proper care of your garden tool so that it continues to perform at its peak. Do not leave your tool outside, always store it away after use in a dry environment. Even in dry weather conditions your tools, if left outside, are exposed to moisture from wet grass and dew.

Cleaning and drying your garden tools will keep them in good working order. Always remove all of the soil from your digging tools after each use by washing the dirt off.

Never put your tools away wet. Allow them to dry completely before storing to prevent rusting and handle rot. For all wood handled tools apply a light coating of boiled linseed oil to help prevent the wood from drying out and cracking. If a wooden handle is very dirty, remove as much of the soil as possible with a stiff brush. If you need to use water, gently wet the handle with a damp cloth, making sure that you don’t soak the wood, as this may cause the grain to lift and the handle to swell.

Thoroughly clean any tools which have been used for chemical applications. Fertilisers and other chemicals will rapidly corrode any metal.

To repair your damaged hose

  • Cut off the damaged piece of hose
  • Take the clamping nut off each end of the connector
  • Then firmly push that end of hose into the middle of the hose fitting, as far as it will go, allowing the claws to clamp down onto the hose
  • Hand tighten the clamping nut over the hose fitting
  • Repeat this step on the other side to conclude joining 2 pieces of hose together

For any questions or advice, please contact our technical advice line on 01480 443789 (Mon-Fri 10am-4pm) or email customerservice@westlandhorticulture.com

Related articles

Flopro Watering Tips & Advice

Flopro Watering Tips & Advice

Here you will find our Flopro Watering Tips & Advice Lawn Care If you want to achieve green lush grass, then following a lawn care...

Health and Wellbeing – Gardening

Health and Wellbeing – Gardening

Gardening can help with many challenges you may come across or feel day to day. It is a therapeutic distraction to your everyday life stresses....

Jobs to do in Spring

Jobs to do in Spring

When spring finally comes around after what may have seemed like a long winter, its finally time to get out into your garden and find...

Featured Products

Recently Viewed Products